Jump to content

Transmission notch panel install



Photo

Finished

Posted by Tyler Dahl , 02-12-2012 - - - - - - · 1,165 views

I decided to fully weld the panel in place. There is alot to spot weld but I feel more comfortable with it being welded in. I'm going to weld the underside as well just to make sure it is solid. It takes less then 30 minutes to get it fitted but then it took me alittle longer to weld it in and then clean it up. With the panel installed it allows alot...


Photo

Making room

Posted by Tyler Dahl , 02-12-2012 - - - - - - · 588 views

To make room for the panel I first cut out the hump part of the tunnel so that I could get an idea of where to line it up. Then I lined the panel up with the e-brake and traced the outside and then came inward 3/4". On the floor pan you cut along the seam on the tunnel side and stop about 3/4" from the second spot weld past where the front brace w...


Photo

Before

Posted by Tyler Dahl , 02-12-2012 - - - - - - · 581 views

I ordered the East Street transmission notch panel and decided to put a blog up in case anyone else needed some help.This first picture just shows the tunnel with the front brace already removed.





November 2017

S M T W T F S
   1234
567891011
12131415161718
19 202122232425
2627282930  

Recent Entries