Roll Cage Kit

(0 customer reviews)

$1,275.00  

Simply the best custom roll cage kit on the market for your SpecMiata. Engineered for safety while taking into account overall weight and ease of entry and exit.
Features
• Lightweight weld in kit. Approximately 100lbs.
• Landing perches, 14 gussets and landing plates all included.
• Partially notched. 11 of the tubes are pre notched. These will be tubes that are in a straight plane with a straight notch.
• Computer controlled bending ensuring accurate bends every time.
• Comes complete with 30 page installation guide with over 55 pictures.
• Every piece is marked with a part # that corresponds to the installation guide and 3 seperate full page schematics within the guide.
• Front down tubes are located behind the dash and allow for dash removal after installation.
• Main Hoop gets installed to perches on the floor that connect the rocker panel, floor and rear tub of the car not to the upper package tray.
• Rear down tubes land next to shock mounts.
• When installed properly less than 1/4 inch of clearance to roof allowing for more head room for taller drivers.
• Includes Nascar door bars on both drivers and passenger sides installed at an angle that provide the driver with added safety in the event of a side impact.
• Allows for stock passenger seat to be reinstalled once complete.
• Includes concealed dash bar that is very high up in the car. Beware of low bars that can hurt you in the event of a roll over accident.
• After complete installation dash is still removable in one piece.
• Includes tubes and plates that connect front down tubes to the firewall.
• Additional tubes available ($40.00) to X brace rear down tubes.
• Kill Switch Plate for passenger side main hoop area.
• Only round front perch in the industry. Laser cut to fit the rocker panel perfectly. You do not need to make any modifications to this perch during the install process at all. This cuts out roughly a half hour per side during installation.
• Typical installation time is 18 to 20 hours for one person with some fabrication skills.