Sign In
Create Account
Hello all,
I am trying to find out what the rear sub frame upper and lower suspension pick up point dimensions, center to center are. I know with the lowers being slotted present a bit of problem, but center to center on the slot is fine.
Thanking you in advance,
Reg Grant
1990 Rear Sub Frame Dimensions
Started by
Reg Grant
, 08-30-2012 09:58 AM
Back to top
Report
#2
Posted 08-30-2012 10:56 AM
Bench Racer
-
- Members
-
- 5,508 posts
Different strokes for different folks : )
- Location:Wauwatosa, WI
- Region:Milwaukee
- Car Year:1990
- Car Number:14
I have an original rear sub-frame out of car empty.
End of slot front most slots is 19 5/8 inches.
End of slot rear most slots is 19 5/8 inches.
The upper actual bolt holes with a measuring tape is a no can do. I measured from edge of clearance hole (outer most holes) to edge of clearance hole front & rear
Edge of clearance hole to edge of clearance hole front is 30 3/8 inch.
Edge of clearance hole to edge of clearance hole rear is 30 3/8 inch.
If you would like the actual measurement of bolt hole to bolt hole I would need to install some bolts & make a cheap & dirty measurement caliper.
Dave Wheeler at AdvancedAutoSports will know these dimensions & he has a rear sub-frame checker for $20.00.
End of slot front most slots is 19 5/8 inches.
End of slot rear most slots is 19 5/8 inches.
The upper actual bolt holes with a measuring tape is a no can do. I measured from edge of clearance hole (outer most holes) to edge of clearance hole front & rear
Edge of clearance hole to edge of clearance hole front is 30 3/8 inch.
Edge of clearance hole to edge of clearance hole rear is 30 3/8 inch.
If you would like the actual measurement of bolt hole to bolt hole I would need to install some bolts & make a cheap & dirty measurement caliper.
Dave Wheeler at AdvancedAutoSports will know these dimensions & he has a rear sub-frame checker for $20.00.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
