21 replies to this topic

[wheel]

There was a failure to communicate.  This is what it says.

 

 

 

3. #15634 – (January Fastrack – Michael Babcock) Camber for SM

Thank you for your request.  Add 9.1.7.C.3.p: p.  Inner bushing(s) on the front upper control arms may be replaced with offset bushings.

[Brian129]

Topeka letter dated 12/18/2014

 

Additionally, recommended changes to the front suspension were approved. Rule 9.1.7.C.3.p now reads “Inner bushing(s) on the front upper control arms may be replaced with offset bushings.”

 

Whose playing games, I copied both statements from the letter that Race Engineering posted to start this thread.

 

EDIT:

And on 12/18/2014 from the Topeka letter I copied and saved the following.

 

"Additionally recommended changes to the front suspension were approved. Rule 9.1.7.C.3.p now reads "nner bushing(s) on the front upper control arms may be replaced with the Mazdaspeed offset bushing (part number 0000-04-5409).”
 

 

 

This is the process for installing bushins in the front upper control arm. Don't know if these ISC Rcaing bushings are legal.

http://www.iscracing.net/bushinst.html

 

 

looks like theres a bit of confusion,  but new edit as of this morning. 

 

(editor's note: corrected 12/19 to reflect the actual motion passed in rule 9.1.7.C.3.p regarding Spec Miata inner bushings.)

........

Additionally, recommended changes to the front suspension were approved. Rule 9.1.7.C.3.p now reads “Inner bushing(s) on the front upper control arms may be replaced with offset bushings.”

 

 

Just talked with Mazdaspeed they were not quite aware of the revision above.