Jump to content

Photo

June 2015 Prelims

- - - - -

  • Please log in to reply
3 replies to this topic

#1
pfrichardson

pfrichardson

    Member

  • Members
  • PipPipPip
  • 77 posts
  • Location:Rockville, MD
  • Region:WDC

...are up: http://www.scca.com/...t.cfm?cid=44472



#2
Ron Alan

Ron Alan

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 3,732 posts
  • Location:Northern CA
  • Car Year:1995

1.6...2275!! 

 

That will make a few happy! Its something! Other than NASA i hadnt seen this though it is in May changes...maybe I missed the announcement?


Ron

RAmotorsports

 

Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#3
B(Kuch)Kucera45

B(Kuch)Kucera45

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 568 posts
  • Location:Idependence
  • Region:NEOhio
  • Car Year:1991
  • Car Number:45
^ :) ^
Kuch
Bona fide - A bonafide Spec Miata driver Instigator - Made a topic or post that inspired other

#4
Johnny D

Johnny D

    Veteran Member

  • Moderators
  • 6,121 posts
  • Location:Fremont, CA
  • Region:San Francisco
  • Car Year:1999
  • Car Number:88

Prelim tech bulletin
http://scca.cdn.race...m TB 15-06a.pdf

NOTE: This preliminary version of the Club Racing Technical Bulletin is provided at this time as a service to the membership. These items may be corrected and will not be official until published on the Fastrack page of the scca.com website on or about May 20.
 
Spec Miata
1. #16753 (Ralph Provitz) SM Valve seals
In Section 9.1.7.h.1, clarify as follows:
"OEM valves must be as supplied by Mazda. Valve location or angle must not be moved. Reshaping of the valves is strictly prohibited. Valve guides may be replaced provided the position of the valve is not changed and the replacement guides are Mazda OEM parts. Valve stem installed height must be per the Mazda factory service manual: Valve stem seals must be Mazda OEM or equivalent. Valve seats may be cut provided the valve seat angles are stock Mazda three angle cut, as defined below."


Prelim minutes
http://scca.cdn.race...elimMinutes.pdf

NOTE: This preliminary version of the Club Racing Board Minutes is provided at this time as a service to the membership. These items may be corrected and will not be official until published on the Fastrack page of the scca.com website on or about May 20.

What Do You Think
GCR
1. #16791 (Jim Wheeler) New Specialty: Data Technician
The CRB requests your feedback on the addition of a new Tech Specialty in Data Services (Data Technician).
Duties would include:
1. Being responsible for placing, operating and removing SCCA supplied data boxes on cars at Majors races.
2. Analysis of data retrieved from all sources, including dyno runs, at-race data boxes and data provided by individual racers.
3. Prepare reports to the applicable Advisory Committees, and to the CRB, with recommendations for competition adjustments.
This specialty would be voluntary, but, the corps would coordinate through SCCA Technical Services.
Please send your feedback through the CRB letter system as a "GCR" item, at www.crbscca.com .

 

J~


2011 NASA Western Endurance Racing Championship E3 Champ
We have a Winnah! - Won their 1st race... Congratulations! Beta-Tester - Assisted us with beta testing the website. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver Novel Approach - When a paragraph simply won't do... Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill Instigator - Made a topic or post that inspired other Make it Rain - Made Paypal donation of $100+




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users