Jump to content

Photo

Coolshirt flow rate?

- - - - -

Best Answer Steve Scheifler , 08-06-2017 08:00 AM

Unrestricted flow rate is only half the equation, you also need sufficient pressure. Since you replaced the pump, I would look for kinks in the lines including shirt, and maybe run a mild bleach mixture through the entire system for 15min in case there is mildew or the like clogging it. Also check wiring to be certain that it is getting full voltage and can handle some current. Does the pump get hot? Go to the full post »


  • Please log in to reply
21 replies to this topic

#21
Steve Scheifler

Steve Scheifler

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 2,816 posts

Do you sweat?
Instigator - Made a topic or post that inspired other Broken record - You are starting to sound like a broken record.

#22
SaulSpeedwell

SaulSpeedwell

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 792 posts
  • Location:NEOhio

is it the common house detergents or the water that damages the Nomex's ability to keep from igniting?

 

It might be the offshore non-Nomex stitched with a counterfeit SFI label that will turn you into human napalm ... 

 

http://sfifoundation...t-drivers-gear/


For faster reply than PM:  miataboxes>>>AT<<<gmail>>DOT<<<com





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users