Popular products

Spec Miata Suspension Kit

This is the MazdaSpeed Motorsports Development Spec Miata required suspension kit. Complete with (4) Bilstein shocks, (4) Eibach Springs, (4) Coil Over Kits, (2) Eibach Sway Bars and FatCat style bumps stop kit

• 1990-1993 1.6L DOHC K-SPEC-M5-SUSP
• 1994-1997 1.8L DOHC K-SPEC-M5-SUS8
• 1999-2005 1.8L DOHC K-SPEC-M5-SUS9

We have sourced all the parts in the kit and this is the best price you will find on this kit anywhere, including Mazdaspeed.

These kits will come with the shocks, springs,collars and perches preassembled!! Just bolt into the car

Window Clips

These window clips were designed to bolt into your Miata in existing holes to allow you to use your stock door glass even if you have gutted the window hardware to accommodate nascar style door bars in your car.

Made from .125 aluminum, they are extremely lightweight and bolt into existing holes in the upper portion of the door. These pieces are water cut for precision and consistency and don't look like your 8th grader made them in shop class.

The existing holes in the door are slotted which give you the ability to adjust the clip vertically to get the perfect fit for your door glass. The tops of the clips are rounded, so they also have the ability to adjust their angle forward and back to achieve the very best fit where the glass rests on the aluminum.

Once installed, they are out of sight and allow you to simply set the glass back into the rubber channel from above the door. Once the glass is aligned in the horizontal rubber channel and vertical rubber channel at the front of the window support, the door glass rests on top of the aluminum and acts as though the window was in the fully rolled up position.

This allows for you to keep the inclement weather out of your race car when transporting it or storing it overnight at the racetrack. Once the upper Black plastic door trim/pad is installed, you can not see the clips at all.

Price is for 4 black anodized window clips.

Center Window Net

The best center net on the market for your Miata! Comes standard with quick release D ring style pull and ratchet and is available in Polyester or Kevlar.

Aim display mounting brackets

We have AIM display mounting brackets. The brackets are specific to each display so please specify what display you have when paying.  The mounts will rivet or screw to the steering column covers and the display will be against the factory cluster and under the gauge hood.
Please specify what you need when ordering. If you don't see what you need, let us know, we will make it.

 

currently have display brackets for

MXS 1.2 MXL2 SOLO 2/SOLO 2 DL

Bronze Level Donation ($50.00)

A Donation of $50.00 Support from our members are used to help offset the cost of running the MazdaRacers.com

"Loud Pedal" Gas Pedal Extension

Features:

Lightweight and durable 1/8" aluminum tread plate construction

Mounts to existing Miata accelerator pedal

Hardware included

Fire Plates

Aluminum block off plates for the stock Miata soft top mounting towers. Laser cut for precision and anodized they look great in the car and are easy to install.

Wheel Spacers

Wheel Spacers - Our light weight Aluminum (6061 T6)wheel spacers are designed to fit snug on the hub and with a little space around the wheel studs to work with the stock studs or upgraded 7/16" wheel studs. Scalloped design to make them as light as possible, yet still giving the wheel a solid surface to sit on between the wheel and the hub.

The Miata comes from the factory wider in the rear than it is in the front to make the vehicle understeer to keep the general public out of trouble on the street. So, if you buy wheels that are 25mm offset which are the widest allowable track width you end up keeping the same out of square design with the rear still being wider than the front promoting understeer. We believe that purchasing wheels that are 35mm or narrower (higher offset number) allows us to tune the vehicle to our specific driving style and surface condition.

The SCCA rule allows for wheel spacers to be used as long as they are the same per axle. So, we like to square up the car by putting spacers on the front to make the front and rear equal or even putting more spacers on the front to make the front track wider than the rear.

All wheel spacers are delivered anadized in black in 1/4", 1/2", 3/8", and now 5mm width.

Price is for a quantity of 4.

* It is highly reccommended to use new longer length wheel studs with wheel spacers thicker than 1/4" to ensure proper torque ratings are achieved.
-----------------------------------------------------------------
Prices
1/4" = $105.00
5mm = $105.00
3/8" = + $30.00
1/2" = + $60.00

ESS Fire Suppression System

This is a Non-Toxic, odorless, environmentally safe fire suppression system, that is biodegradable and leaves no residue. It gives off no toxic fumes and is harmless to the skin and eyes. This is the perfect solution for the SpecMiata!

SP Spin Bracket

Features:

Our new 14-gauge galvanized steel bracket for the SPX 1.6L intake allows you to rotate the AFM for maximum tuning abilities at the track or at the dyno

Fits 1.6 Cars