Sign In
Create Account
1
1 votes
Wiring is work
Posted by
FTodaro
,
11-09-2015
·
3,220 views
I just about have the main Harness out of the car. Sadly the crush damage from the wreck has created a pinch point, so I cannot get the last plug of the harness out. I will have to cut this bar in the cage. I have sold the cage but this should not be deal breaker.
The main harness is almost out. this is the first time i have attempted a harness.
There is this main harness, (this is the one in the picture above, it supplies the headlights, goes to the trunk area to supply lighting) then there is a second harness with the fuse box on it that goes along the power plant frame, a third Harness (this goes off the main harness to supply the engine goes from the ECU to the sensors on the motor) and then a Forth harness that supplies the trunk and the fuel pump. Its been a task, just pulling these out. I will show the process of installing them. Before i do, i will inspect carefully and re tape the harnesses.
11/10/15
Moving the harnesses to the new car. The harnesses for the most part are plug and play. there are lots of plugs the ones that are not in use I put some tape over them so i do not keep hunting for a plug. the harnesses are designed so that they only can plug into one plug so its a matter of hunting them down.
The main harness is almost out. this is the first time i have attempted a harness.
There is this main harness, (this is the one in the picture above, it supplies the headlights, goes to the trunk area to supply lighting) then there is a second harness with the fuse box on it that goes along the power plant frame, a third Harness (this goes off the main harness to supply the engine goes from the ECU to the sensors on the motor) and then a Forth harness that supplies the trunk and the fuel pump. Its been a task, just pulling these out. I will show the process of installing them. Before i do, i will inspect carefully and re tape the harnesses.
11/10/15
Moving the harnesses to the new car. The harnesses for the most part are plug and play. there are lots of plugs the ones that are not in use I put some tape over them so i do not keep hunting for a plug. the harnesses are designed so that they only can plug into one plug so its a matter of hunting them down.
