Jump to content

Photo

Toe alignment

- - - - -
Started by ChrisA , 05-07-2012 07:53 AM

  • Please log in to reply
9 replies to this topic

#1
ChrisA
Posted 05-07-2012 07:53 AM

ChrisA

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 659 posts
  • Location:Richmond, VA
  • Region:NCR
  • Car Year:1999
  • Car Number:58
Does anybody know how toe in inches translates to toe in degrees? Say I wanted 1/16" toe (in/out) per side, but the shop uses degrees, what do you tell them to aim for?

Chris

 

Happiness is a dry martini and a good woman ... or a bad woman.
- George Burns

#2
davew
Posted 05-07-2012 08:00 AM

davew

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 2,297 posts
  • Location:Beloit, Wi
  • Region:Chicago
  • Car Year:1999
  • Car Number:72
Have them push the button on their machine so it reads inches instead of degrees. It is in the "set-up" menu or something similar.

Dave
  • dstevens and Glenn like this

Dave Wheeler
Advanced Autosports, the nations most complete Spec Miata shop
Author, Spec Miata Constructors Guide, version 1 and 2.0

Building Championship winning cars since 1995

4 time Central Division Spec Miata Champion car builder 2012-2013-2014-2017

Back to Back June Sprints Spec Miata 1-2 finishes 2016 and 2017

5 time June Sprints winner in Mazda's

6 Time Northern Conference Champion Car Builder

2014 SCCA Majors National point Champion car builder

2014 SCCA Runoffs winner, T4 (Bender)

2014 Central Division Champion, ITS (Wheeler)

2013 Thunderhill 25 hour winning crew chief

2007 June Sprints winner, (GT1, Mohrhauser)

Over 200 race wins and counting.
www.advanced-autosports.com
dave@advanced-autosports.com
608-313-1230

Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill We have a Winnah! - Won their 1st race... Congratulations! Sponsor / Advertiser - Site sponsor / advertiser... support these guys! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#3
FTodaro
Posted 05-07-2012 08:07 AM

FTodaro

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 3,084 posts
  • Location:Columbus Ohio
  • Region:Great Lakes
  • Car Year:2001
  • Car Number:35

Does anybody know how toe in inches translates to toe in degrees? Say I wanted 1/16" toe (in/out) per side, but the shop uses degrees, what do you tell them to aim for?

I think you can Google a conversion chart, I have seen it some place.

But like Dave said they can push a button and they know what your ordering.

Frank
TnT Racing
SCCA Ohio Valley Region
 

Make it Rain - Made Paypal donation of $100+ We have a Winnah! - Won their 1st race... Congratulations! Bona fide - A bonafide Spec Miata driver Donor - Made PayPal donation

#4
Zauskycop
Posted 05-07-2012 11:20 AM

Zauskycop

    Member

  • Members
  • PipPipPip
  • 250 posts
  • Location:Hinckley IL
  • Region:Chicago
  • Car Year:1999
  • Car Number:45
Found this on Pelican Parts, so I cannot verify its validity. Personally, I agree with Dave...

CAMBER MEASUREMENT BASED ON 15 INCH WHEELS
Camber measurement 1 - 32nds or 0.03125 inches = Camber angle 7.16201 minutes
Camber measurement 2 - 32nds or 0.0625 inches = Camber angle 14.324 minutes
Camber measurement 3 - 32nds or 0.09375 inches = Camber angle 21.4861 minutes
Camber measurement 4 - 32nds or 0.125 inches = Camber angle 28.6483 minutes
Camber measurement 5 - 32nds or 0.15625 inches = Camber angle 35.8106 minutes
Camber measurement 6 - 32nds or 0.1875 inches = Camber angle 42.9731 minutes
Camber measurement 7 - 32nds or 0.21875 inches = Camber angle 50.1358 minutes
Camber measurement 8 - 32nds or 0.25 inches = Camber angle 57.2987 minutes
Camber measurement 9 - 32nds or 0.28125 inches = Camber angle 1.07436 degrees
Camber measurement 10 - 32nds or 0.3125 inches = Camber angle 1.19375 degrees
Camber measurement 11 - 32nds or 0.34375 inches = Camber angle 1.31315 degrees
Camber measurement 12 - 32nds or 0.375 inches = Camber angle 1.43255 degrees
Camber measurement 13 - 32nds or 0.40625 inches = Camber angle 1.55196 degrees
Camber measurement 14 - 32nds or 0.4375 inches = Camber angle 1.67137 degrees
Camber measurement 15 - 32nds or 0.46875 inches = Camber angle 1.79079 degrees
Camber measurement 16 - 32nds or 0.5 inches = Camber angle 1.91022 degrees
Camber measurement 17 - 32nds or 0.53125 inches = Camber angle 2.02966 degrees
Camber measurement 18 - 32nds or 0.5625 inches = Camber angle 2.1491 degrees
Camber measurement 19 - 32nds or 0.59375 inches = Camber angle 2.26856 degrees
Camber measurement 20 - 32nds or 0.625 inches = Camber angle 2.38802 degrees
Camber measurement 21 - 32nds or 0.65625 inches = Camber angle 2.5075 degrees
Camber measurement 22 - 32nds or 0.6875 inches = Camber angle 2.62699 degrees
Camber measurement 23 - 32nds or 0.71875 inches = Camber angle 2.74649 degrees
Camber measurement 24 - 32nds or 0.75 inches = Camber angle 2.866 degrees
Camber measurement 25 - 32nds or 0.78125 inches = Camber angle 2.98552 degrees
Camber measurement 26 - 32nds or 0.8125 inches = Camber angle 3.10505 degrees
Camber measurement 27 - 32nds or 0.84375 inches = Camber angle 3.2246 degrees
Camber measurement 28 - 32nds or 0.875 inches = Camber angle 3.34417 degrees
Camber measurement 29 - 32nds or 0.90625 inches = Camber angle 3.46374 degrees
Camber measurement 30 - 32nds or 0.9375 inches = Camber angle 3.58334 degrees
Camber measurement 31 - 32nds or 0.96875 inches = Camber angle 3.70294 degrees
Camber measurement 32 - 32nds or 1 inches = Camber angle 3.82257 degrees
Tracy Ramsey
45 SM
Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#5
dstevens
Posted 05-07-2012 12:56 PM

dstevens

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 1,404 posts
  • Location:Vegas
  • Region:LVR
Posted Image


http://www.advanced-...3&products_id=3


:king:
  • Glenn likes this

#6
Alberto
Posted 05-07-2012 01:18 PM

Alberto

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 1,471 posts
  • Location:Mountain View, CA
  • Region:SFR
  • Car Year:1990
Try this
http://forums.pelica...grees-help.html
Bona fide - A bonafide Spec Miata driver

#7
Glenn
Posted 05-07-2012 01:27 PM

Glenn

    Mid Pack Member

  • SMembers
  • PipPipPipPipPip
  • 864 posts
  • Location:Bunker Hill, WV
  • Region:SE

Found this on Pelican Parts, so I cannot verify its validity. Personally, I agree with Dave...

CAMBER MEASUREMENT BASED ON 15 INCH WHEELS
Camber measurement 1 - 32nds or 0.03125 inches = Camber angle 7.16201 minutes
Camber measurement 2 - 32nds or 0.0625 inches = Camber angle 14.324 minutes
Camber measurement 3 - 32nds or 0.09375 inches = Camber angle 21.4861 minutes
Camber measurement 4 - 32nds or 0.125 inches = Camber angle 28.6483 minutes
Camber measurement 5 - 32nds or 0.15625 inches = Camber angle 35.8106 minutes
Camber measurement 6 - 32nds or 0.1875 inches = Camber angle 42.9731 minutes
Camber measurement 7 - 32nds or 0.21875 inches = Camber angle 50.1358 minutes
Camber measurement 8 - 32nds or 0.25 inches = Camber angle 57.2987 minutes
Camber measurement 9 - 32nds or 0.28125 inches = Camber angle 1.07436 degrees
Camber measurement 10 - 32nds or 0.3125 inches = Camber angle 1.19375 degrees
Camber measurement 11 - 32nds or 0.34375 inches = Camber angle 1.31315 degrees
Camber measurement 12 - 32nds or 0.375 inches = Camber angle 1.43255 degrees
Camber measurement 13 - 32nds or 0.40625 inches = Camber angle 1.55196 degrees
Camber measurement 14 - 32nds or 0.4375 inches = Camber angle 1.67137 degrees
Camber measurement 15 - 32nds or 0.46875 inches = Camber angle 1.79079 degrees
Camber measurement 16 - 32nds or 0.5 inches = Camber angle 1.91022 degrees
Camber measurement 17 - 32nds or 0.53125 inches = Camber angle 2.02966 degrees
Camber measurement 18 - 32nds or 0.5625 inches = Camber angle 2.1491 degrees
Camber measurement 19 - 32nds or 0.59375 inches = Camber angle 2.26856 degrees
Camber measurement 20 - 32nds or 0.625 inches = Camber angle 2.38802 degrees
Camber measurement 21 - 32nds or 0.65625 inches = Camber angle 2.5075 degrees
Camber measurement 22 - 32nds or 0.6875 inches = Camber angle 2.62699 degrees
Camber measurement 23 - 32nds or 0.71875 inches = Camber angle 2.74649 degrees
Camber measurement 24 - 32nds or 0.75 inches = Camber angle 2.866 degrees
Camber measurement 25 - 32nds or 0.78125 inches = Camber angle 2.98552 degrees
Camber measurement 26 - 32nds or 0.8125 inches = Camber angle 3.10505 degrees
Camber measurement 27 - 32nds or 0.84375 inches = Camber angle 3.2246 degrees
Camber measurement 28 - 32nds or 0.875 inches = Camber angle 3.34417 degrees
Camber measurement 29 - 32nds or 0.90625 inches = Camber angle 3.46374 degrees
Camber measurement 30 - 32nds or 0.9375 inches = Camber angle 3.58334 degrees
Camber measurement 31 - 32nds or 0.96875 inches = Camber angle 3.70294 degrees
Camber measurement 32 - 32nds or 1 inches = Camber angle 3.82257 degrees


Except he was asking for TOE and its based on 24" spacing :king: IIRC

Glenn Murphey, Crew Chief
Owner Crew Chief Services The Pinnacle of Excellence, Contract Crew Services for the racing community.
Soon to be back in the club racing scene for good ;)

 

Bona fide - A bonafide Spec Miata driver Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#8
Protech Racing
Posted 05-24-2012 08:12 PM

Protech Racing

    Member

  • Members
  • PipPipPip
  • 54 posts
  • Location:FL.
You should be able to check your own. It can move a lot just racing and running over some curbs. I check mine every race morning.
2- 3mm out works fine. for me.( zero scrub) MM

__________________
http://fwdracingguide.com/
Money back guarantee!, Go $100 faster with this 20$ guide to all FWD race cars, racing VWs, and oval track/Road race/Chumpcar/ FWD cars.
"When you think that you can not possibly go any faster, you wont."
http://www.ogren-engineering.com/

mogren@tampabay.rr.com, 352.428/8983

#9
Jim Daniels - FIG
Posted 06-17-2012 07:55 AM

Jim Daniels - FIG

    Site Founder

  • Administrators
  • 274 posts
  • Location:Germantown TN
  • Region:Mid-South
  • Car Year:1989
  • Car Number:Any
The first step to get off the cool-aid and on a path of self setup is setting your own toe.  This might be your red flag moment to do that now.  Not only can it change but for safety you need to be checking it anyway.  Also, there is not an exact spot, its a dynamic setting that you need to experiment with.

"Never Stop Challenging"



Jim Daniels

Auto Sports Consulting / Coaching

My cup runneth over - Playboy Mazda MX-5 Cup Champ Beta-Tester - Assisted us with beta testing the website. Sponsor / Advertiser - Site sponsor / advertiser... support these guys! Make it Rain - Made Paypal donation of $100+ We have a Winnah! - Won their 1st race... Congratulations! ARRC Champion - Won the ARRC Race in a Spec Miata Series Champ - Won a points based series in a Spec Miata Bona fide - A bonafide Spec Miata driver Instigator - Made a topic or post that inspired other BFG Supertour Winner - Majors Winner - World Challenge Participant in a Mazda - World Challenge Participant in a Mazda Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill June Sprints winner - June Sprints winner Grand-Am Competitor - Grand-Am Competitor in a Mazda (can be GT, and ST)

#10
Todd Tagget
Posted 06-17-2012 12:15 PM

Todd Tagget

    Member

  • Members
  • PipPipPip
  • 441 posts
  • Location:Reno, NV
  • Region:SFR
  • Car Year:1991
  • Car Number:42
Hey Alberto, what's your screen name on PP ?
Bona fide - A bonafide Spec Miata driver
Back to Spec Miata Setup Guide


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

  1. Mazda Racers
  2. → Spec Miata
  3. → Racing Setup, coaching, Track notes etcology
  4. → Spec Miata Setup Guide