Sign In
Create Account
What changes should I expect to see to alignment settings after installing the FCM kit? I think ride height drops by 1/2" automatically, right? What else?
Thanks.
Effect of FCM kit on alignment
Started by
Sphinx
, 06-21-2012 10:02 PM
#1
Posted 06-21-2012 10:02 PM
Sphinx
-
- Members
-
- 651 posts
Veteran Member
- Location:Atlanta
- Region:ATL
Back to top
Report
#2
Posted 06-21-2012 10:03 PM
Jim Drago
-
- Administrators
-
- 6,566 posts
East Street Racing / 2 Time National Champion
- Location:Memphis, Tn
- Region:Mid South
- Car Year:2005
- Car Number:2
ride height does not change due to fat cats. Are you changing from early hats to 99 hats?
East Street Auto Parts
Jim@Eaststreet.com
800 700 9080
#3
Posted 06-22-2012 07:50 AM
Sphinx
-
- Members
-
- 651 posts
Veteran Member
- Location:Atlanta
- Region:ATL
Correct, I'm going from whatever was in the original mazdaspeed kit to the FCM kit. (1.6L)
Also, how many turns of the adjustment collar equal 1/4", 1/2", etc.?
Also, how many turns of the adjustment collar equal 1/4", 1/2", etc.?
#4
Posted 06-22-2012 09:34 AM
Jim Drago
-
- Administrators
-
- 6,566 posts
East Street Racing / 2 Time National Champion
- Location:Memphis, Tn
- Region:Mid South
- Car Year:2005
- Car Number:2
1 turn is about 1/8 th in ride height
I believe the 99 hats lower the car about 1/2 inch form memory ( which isn't that good)
I believe the 99 hats lower the car about 1/2 inch form memory ( which isn't that good)
East Street Auto Parts
Jim@Eaststreet.com
800 700 9080
#5
Posted 06-22-2012 10:38 AM
Sphinx
-
- Members
-
- 651 posts
Veteran Member
- Location:Atlanta
- Region:ATL
How about on the alignment settings? I know more neg camber, but how much more (generally)? How about toe?
#6
Posted 06-25-2012 09:56 AM
davew
-
- SMembers
-
- 2,297 posts
Veteran Member
- Location:Beloit, Wi
- Region:Chicago
- Car Year:1999
- Car Number:72
You will need to reset everything. No "move it x turns and you will be fine".
Dave
Dave
Dave Wheeler
Advanced Autosports, the nations most complete Spec Miata shop
Author, Spec Miata Constructors Guide, version 1 and 2.0
Building Championship winning cars since 1995
4 time Central Division Spec Miata Champion car builder 2012-2013-2014-2017
Back to Back June Sprints Spec Miata 1-2 finishes 2016 and 2017
5 time June Sprints winner in Mazda's
6 Time Northern Conference Champion Car Builder
2014 SCCA Majors National point Champion car builder
2014 SCCA Runoffs winner, T4 (Bender)
2014 Central Division Champion, ITS (Wheeler)
2013 Thunderhill 25 hour winning crew chief
2007 June Sprints winner, (GT1, Mohrhauser)
Over 200 race wins and counting.
www.advanced-autosports.com
dave@advanced-autosports.com
608-313-1230
#7
Posted 06-27-2012 09:09 AM
Sphinx
-
- Members
-
- 651 posts
Veteran Member
- Location:Atlanta
- Region:ATL
You will need to reset everything. No "move it x turns and you will be fine".
Dave
I realize that, but due to time constraints, I didn't have time to do a proper setup. In preparation for the next track day, I'll be doing that. For reference sake, I found slightly more toe in the rear (about 1/16") and about another 1/16" out in the front. I'll check camber in the next day or so.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
