Replacment Leaking Tire
#1
Posted 02-26-2011 04:19 PM
Should I get another tire shaved at 2/32 to match the other 3 tires or just get another 3/32?
Thanks
#2
Posted 02-26-2011 04:22 PM
#3
Posted 02-26-2011 06:20 PM
Team ///Miata #12
PajamaPants Racing
NASA Midwest
#4
Posted 02-26-2011 07:39 PM
Where's the nail? If its in the sidewall you need a new tire. If its in the tread, plug it and run it.
Or remove and patch...unless there is a rule against this?
Ron
RAmotorsports
#5
Posted 02-26-2011 10:35 PM
Where's the nail? If its in the sidewall you need a new tire. If its in the tread, plug it and run it.
Ummm.....no
http://philstireservice.com Enkei Team Dynamics The Miata Wheel Motegi Apex Wedsport Hoosier Toyo BFG Michelin Nankang Federal
#6
Posted 02-26-2011 11:01 PM
#7
Posted 02-27-2011 02:01 PM
I agree with Keith to get a 3/32 and put it where it wears the hardest.
Joe
#8
Posted 02-28-2011 10:16 AM
Dave
Dave Wheeler
Advanced Autosports, the nations most complete Spec Miata shop
Author, Spec Miata Constructors Guide, version 1 and 2.0
Building Championship winning cars since 1995
4 time Central Division Spec Miata Champion car builder 2012-2013-2014-2017
Back to Back June Sprints Spec Miata 1-2 finishes 2016 and 2017
5 time June Sprints winner in Mazda's
6 Time Northern Conference Champion Car Builder
2014 SCCA Majors National point Champion car builder
2014 SCCA Runoffs winner, T4 (Bender)
2014 Central Division Champion, ITS (Wheeler)
2013 Thunderhill 25 hour winning crew chief
2007 June Sprints winner, (GT1, Mohrhauser)
Over 200 race wins and counting.
www.advanced-autosports.com
dave@advanced-autosports.com
608-313-1230
#9
Posted 02-28-2011 11:08 AM
I'll second what Joe said, NEVER EVER EVER patch a race tire. For a street car that never gets much hotter than ambient temp, OK. For a race tire that sees 170+ degrees no way.
Dave
Great advise...my original reply was definitely a big question mark. Found out plugs don't work well on my trailer tires...though it did get me home
Ron
RAmotorsports
#10
Posted 03-01-2011 09:58 AM
Ummm.....no
You missed the perfect opportunity Phil!
Or this one:
Back to work with me!
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users