

SM2 North-east
#1
Posted 03-08-2011 07:25 PM

#2
Posted 03-09-2011 01:34 PM

Any idea on what the rules are? Any idea what run group it would be in? I'm assuming (hoping?) it will be separate from SSM so those of us who double dip our cars can continue to do so.
Vick
www.volko.com
Black SM/SM2/"Slap Bracelet Throwback" #12 in the Northeast....if the car was made in the early 90's it should look like it.
1.6L forever! Bring on your '99's and '01's!



#3
Posted 03-09-2011 10:08 PM

Should be online soon.
94-97 cars are not interchangable (rear gear)
#4
Posted 05-11-2011 02:08 PM

What is going on with the handful of SSM racers we have up here in the North East (distinct from WDC region, where a strong SSM group is in effect).
I used to enjoy double dipping my SSM (97 hp according to Kessler Engineering) in SM, but at the end of last year got tired of people pulling away from me in SM races.
Are a lot of people changing their cars over from SSM to SM? In terms of the people I can think of fast:
AF: Changed
AM: Changed
Brandon: No Change (runs with WDC a lot)
Ed Z: ??
Ian P: ??
There are a handful of others, but I don't know how active they were on the forums.
Little help? Trying to put myself where the most competition will be, and I think SSM and SM2 are going to be a combined group in the North East.
-Vick
Vick
www.volko.com
Black SM/SM2/"Slap Bracelet Throwback" #12 in the Northeast....if the car was made in the early 90's it should look like it.
1.6L forever! Bring on your '99's and '01's!



#5
Posted 05-11-2011 04:41 PM

you should too man...
-you can always switch back
AF: Changed
AM: Changed
Brandon: No Change (runs with WDC a lot)
Ed Z: ??
Ian P: ??
There are a handful of others, but I don't know how active they were on the forums.
Little help? Trying to put myself where the most competition will be, and I think SSM and SM2 are going to be a combined group in the North East.
-Vick
[/quote]
#6
Posted 05-12-2011 08:27 AM

Hero To The Momentum Challenged
WDCR SSM #30
#7
Posted 05-12-2011 08:53 AM

#8
Posted 05-12-2011 08:20 PM

So on a course that has some real need for torque and hp, the NA cars did fine.
I am lucky to be in WDCR where the SSM class is well-populated. The only reason I have thought of to move to SM is to move to an NB car because I am a fatty. Otherwise, I am having a great time on a reasonable (for racing) budget fighting it out with my friends.
Edited by Glenn Davis, 05-13-2011 01:31 PM.


#9
Posted 05-13-2011 01:19 PM

1.8 SSM cars are only legal in SSM, not SM, so no cross over there.
Ask anyone who is looking to get into racing Miatas and they will want to buy a 99' not a NA car.
NA cars are really not competive agains 99' in SM.
So, why not have a place for them to be, SM2.
Why do other regions not have the SSM following?
Because racers are not willing to step up and organize!

#10
Posted 05-13-2011 01:38 PM

MARRS has a great SSM following but in most other regions SSM numbers have fallin off.
1.8 SSM cars are only legal in SSM, not SM, so no cross over there.
Ask anyone who is looking to get into racing Miatas and they will want to buy a 99' not a NA car.
NA cars are really not competive agains 99' in SM.
So, why not have a place for them to be, SM2.
Why do other regions not have the SSM following?
Because racers are not willing to step up and organize!
I understand that, but don't agree with the NA's being not competitive. The NA won the SM MARRS championship for the last couple of years, and if Price and Kopp keep it up, it will win again. The Meathead camp has a couple of NB's that are competitive, with experienced drivers, but they are not at all dominant. I really expected the test to be at VIR this past week. There were three top-prepped NB's out there. On Saturday, the NB was pushed to the win by an NA. On Sunday, there wasn't an NB in the same zipcode when the NA won.
If I move to SM, it will be in an NB, but only because I know I can make weight.


#11
Posted 05-13-2011 02:04 PM

#12
Posted 05-13-2011 06:47 PM

Pocono Regional: 17 SM, 4 SSM
NH Regional: 25ish SM, 8 or 9 SSM
Note I didn't help any car counts....I was at the Devil in the Dark in an ITA car, and a wedding.
MARRS has a great SSM class, but living on LI it's hard to make the tow way down there. I'm more of a WGI to NJMP guy.
Vick
www.volko.com
Black SM/SM2/"Slap Bracelet Throwback" #12 in the Northeast....if the car was made in the early 90's it should look like it.
1.6L forever! Bring on your '99's and '01's!



#13
Posted 05-13-2011 06:58 PM

I actually really enjoyed running one class recently at Pocono on Sunday. It has been several years now of SSm & SM and honestly it can be hectic, doing both. It was nice to run one class.
I wish all the miatas were one class again with the large fields we used to have.
Kevin@techsportracing.com
www.techsportracing.com
#14
Posted 05-25-2011 05:27 PM

I wish all the miatas were one class again with the large fields we used to have.
Now that you have your '99. ( :


#15
Posted 05-25-2011 06:54 PM

lolNow that you have your '99. ( :
believe me, I wish they never allowed them,
"If you can't beat them join them"
Kevin@techsportracing.com
www.techsportracing.com
#16
Posted 06-01-2011 03:04 PM


And my apologies for the length of the post...
(Jerry - I don't mean to put words in your mouth so please correct me if I mis-stuff something in there)
There are two distinct attitudes about SSM between some regions here in the NE: one wishes for more crossover (from SM) and the other is just fine with how things are currently. I'll leave it to you to figure out who's who.
Fortunately (or unfortunately if you're a pessimist), there's only one person "active" in trying to drum up a more cohesive rules package with the intent of trying to increase said crossover division-wide and he's attempting to do so with common sense additions to the "base premise" of SSM.
Why a certain region feels that R-package tie rod ends (TREs) or alternate shock hats imply a higher level of preparedness over a car that doesn't have them is beyond me. If you're still limiting the air that can come in/out of the engine while restricting both the quantity of fuel & the applied spark, there's not a whole lot of room left to play with any of the "expensive" portions of car prep (dyno time for PCM/intake/exhaust combinations, exotic plugs & wires...) Even with the TREs & shock hats it still comes down to the driver's skill and what they can do with what you've given them within the platform itself.
How can disallowing those make the field any more competitive otherwise?
As it usually happens in most competitive events (and with us "quick fix" humans), those who aren't at the front are looking for an easy way to reach that point. So you get petitions to do this, or that, or as with the PCM & fuel regulator for 2011, a way to eliminate an "impossible to tech" cheat (I do use quotes but that's another discussion for another forum


Poof! SSM was born.
Maybe the contented region launched it right by requiring a dyno test and sealing which ensured no monkeying with the internals. Or perhaps the other regions didn't realize the need for this sub-class soon enough and now there's too much inertia to get the contented one to change their approach. Regardless, my biggest beef with SSM is the lack of any self-policing that (I presume) goes on in SM but that's partly my own fault too.
Only once did I call another driver out for having the alternate shock hats and he was nice enough to DNS for our race and I've not heard of anyone (other than the Summit incident from earlier last year for spark plug wires) else doing so within the division.
But this brings out another bit of the rules that either I've missed or has never been addressed: what's stopping someone from building a "pro" SM motor and then slapping on the proper SSM head (thickness requirement), intake, exhaust, & plate and go running with SSM? I don't see anything in the SSM rules that disallows someone from doing so?
Anyway - sorry for the rant.
This situation is a classic chicken/egg proposition: one region feels they've matched their membership's needs adequately whereas others are left playing catch-up and then including some variables (IMO, mostly for the better ultimately) which the first doesn't particularly agree with (and I've not heard an adequately explained reason other than "Our participation numbers prove we don't need it.")
To address those who were curious about my participation, I'm still running SSM for 2011 however with the recent changes to the NA1.8 (bigger plate, lighter weight, R-pack TREs, 4.3 ring gear, shock hats) I'm seriously considering a run to SM for 2012. Either that or I make the wife take a knife to a gun fight and have her run the SSM in SM.

Now, if I go with SM for 2012, and if SM2 still exists then, will I decide to play in both or just one, I'm not sure. So count another "on the fence" for SM2 participation.
L8R,
Brandon
P.S. Anyone coming to the Pro-IT at NJMP this weekend?

#17
Posted 06-01-2011 05:30 PM

Back in my hole now, trying to massage another HP out of my pathetic 1.6 SM...
http://www.olsinvestfinancial.com
http://www.alsinfo.org
http://www.weekendwarriorracing.com
Alan Olson
SSM Driver Rep
WDCR SCCA



#18
Posted 06-02-2011 04:21 AM

So why punish/change those of us who see SSM at WDCR as A Good Thing? Nobody is forcing the rest of the region to change to our rules. If you want to compete here, you run to our rules, which is no different than any other class. I suggest you look to the membership in the rest of the region, who is decidedly not local and yet chooses to make the trip to Summit all year to run in a class that works. I could run in races a lot closer to home than SP, but I chose not to, because WDCR's program works for me. If the rest of the NE offered that level of competitiveness I might reconsider.
/rant
Hero To The Momentum Challenged
WDCR SSM #30
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users