Jump to content

Photo

Miata "fire plates"


  • Please log in to reply
3 replies to this topic

#1
forestdweller37

forestdweller37

    Member

  • Members
  • PipPipPip
  • 62 posts
  • Location:Iowa
  • Region:Des Moines Valley
  • Car Year:1994
With everything stripped out of our "Chump" Miata, I noticed two very large paths from the trunk area to the cockpit. I'm referring to the ones located directly forward of the rear damper mounting points ahead of the fuel fill on the left and battery on the right. I would like to fabricate some blocking plates to close them off for safety. With our car in the shop getting caged, I don't have access to it to make measurements. Does anyone have a pattern that they would be willing to share? I believe these plates are a required part of an SM build.

Thank you in advance,

-Chris

#2
Mike Collins

Mike Collins

    Big Cheese

  • Moderators
  • 1,262 posts
  • Location:Summit Point Motorsports Park
  • Region:Washington DC
  • Car Number:75
Various vendors sell them.
Mike "MEATHEAD" Collins
Founder - Partner
MEATHEADRacing
240-476-1593

www.meatheadracing.com
Make it Rain - Made Paypal donation of $100+ Sponsor / Advertiser - Site sponsor / advertiser... support these guys! Bona fide - A bonafide Spec Miata driver Sugar Daddy - Made PayPal donation of $500+ Donor - Made PayPal donation Beta-Tester - Assisted us with beta testing the website. MX5 Cup Participant - Has Participated in a MX5Cup.com Series Event Instigator - Made a topic or post that inspired other

#3
john mueller

john mueller

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 1,075 posts

Does anyone have a pattern that they would be willing to share? I believe these plates are a required part of an SM build.


Not required but the openings do need to be closed... Make your own - Use cardboard to make template, go to HomeDepot or Lowes for sheet metal, cut with snips bolt or rivet in place. Boom. Done. Easy.
We have a Winnah! - Won their 1st race... Congratulations! Series Champ - Won a points based series in a Spec Miata Bona fide - A bonafide Spec Miata driver Instigator - Made a topic or post that inspired other Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill Make it Rain - Made Paypal donation of $100+

#4
dstevens

dstevens

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 1,404 posts
  • Location:Vegas
  • Region:LVR
Yep, they are easy to make. If you are going to make some covers for the package tray as well it's a better deal to go to your local steel yard. A small piece of sheet, for example .032 AL in a 2' x 2' (more or less the equivalent of 22 ga) at a big box is going to cost about 25 bucks. A 4' x 10' sheet is $37 at my local yard. The difference is $6.25 sq/ft or $1.10 sq/ft. Mild steel sheet is cheaper than that.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users