Jump to content

Photo

How Long Are Offset Bushing Lasting?

- - - - -

  • Please log in to reply
28 replies to this topic

#1
Richard Astacio

Richard Astacio

    Member

  • Members
  • PipPipPip
  • 339 posts
  • Location:Stamford CT
  • Region:NER
  • Car Year:2003
  • Car Number:80

I was wondering how many race weekend are the white line offset bushing lasting? I had to replace mine after 10 race weekends, less than 7 months. 

 

 


Richard Astacio

2003 Spec Miata VVT & 2013 Cup Car
 

We have a Winnah! - Won their 1st race... Congratulations! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#2
Todd Lamb

Todd Lamb

    Driver Coach // Racer

  • SMembers
  • PipPipPipPipPip
  • 980 posts
  • Location:Atlanta, GA
Had to replace them why?

Full disclosure: SMAC chairman, my opinions do not reflect anything to do with the SMAC unless specifically stated.

Todd Lamb
Atlanta Speedwerks
www.atlspeedwerks.com
SpeedShift Transmissions - reliability and performance

Spec Miata / Spec Boxster / Spec Cayman specialist

Spec MX-5 Challenge Series Director

Global MX-5 Cup team

MX5 Cup Champion - Has won a Season in the MX5 Cup Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill NASA Champs Winner - NASA Champs Winner ARRC Champion - Won the ARRC Race in a Spec Miata We have a Winnah! - Won their 1st race... Congratulations! Series Champ - Won a points based series in a Spec Miata Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver June Sprints winner  - June Sprints winner Majors Winner - World Challenge Winner - World Challenge Winner

#3
Richard Astacio

Richard Astacio

    Member

  • Members
  • PipPipPip
  • 339 posts
  • Location:Stamford CT
  • Region:NER
  • Car Year:2003
  • Car Number:80

The rubber disintegrated.  Here is the link to the photo, it was too large to upload.

 

https://drive.google...iew?usp=sharing


Richard Astacio

2003 Spec Miata VVT & 2013 Cup Car
 

We have a Winnah! - Won their 1st race... Congratulations! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#4
Bench Racer

Bench Racer

    Different strokes for different folks : )

  • Members
  • PipPipPipPipPip
  • 5,508 posts
  • Location:Wauwatosa, WI
  • Region:Milwaukee
  • Car Year:1990
  • Car Number:14

Can't see all that much from the picture.

 

What caused you to remove the control arm and take a look, a potential bushing issue or something else?


  • Gabriel Estrada likes this
Broken record - You are starting to sound like a broken record. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#5
Richard Astacio

Richard Astacio

    Member

  • Members
  • PipPipPip
  • 339 posts
  • Location:Stamford CT
  • Region:NER
  • Car Year:2003
  • Car Number:80

Can't see all that much from the picture.

 

What caused you to remove the control arm and take a look, a potential bushing issue or something else? 

 

  I was struggling at the Jersey Major race on all the right handers, and no matter how I attacked the corners the car was doing something different every single time. 

At first I chalked it up to tires, extreme heat conditions, etc however we checked the camber and it gave us different readings after coming off the track (Twice) and when we looked at the bushing they were able to see there was a piece of rubber missing from the upper control arm. It was moving every-time I was turning....

 

 We were able to replace it with a regular bushing for the Sunday race but I was not able to get the camber setting that we liked without the offset bushing,....

 

The bushings were all installed new just before Christmas and the car participated in the following events in 2016:

 

Homestead

Sebring

VIR

Summit (twice)

NJMP (twice)

Montecello 

Palmer

Ohio (2 times)

Lime Rock 

i


Richard Astacio

2003 Spec Miata VVT & 2013 Cup Car
 

We have a Winnah! - Won their 1st race... Congratulations! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#6
Johnny D

Johnny D

    Veteran Member

  • Moderators
  • 6,121 posts
  • Location:Fremont, CA
  • Region:San Francisco
  • Car Year:1999
  • Car Number:88

Chris
We have been drilling and pop riveting them, just to insure the bushing doesn't rotate.
Jim


Have you ?
J~
2011 NASA Western Endurance Racing Championship E3 Champ
We have a Winnah! - Won their 1st race... Congratulations! Beta-Tester - Assisted us with beta testing the website. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver Novel Approach - When a paragraph simply won't do... Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill Instigator - Made a topic or post that inspired other Make it Rain - Made Paypal donation of $100+

#7
Jamz14

Jamz14

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 1,310 posts
  • Location:California

Can't see all that much from the picture.

 

What caused you to remove the control arm and take a look, a potential bushing issue or something else?

Picture looks pretty clear to me. I bushing that is coming apart in multiple places.


Broken record - You are starting to sound like a broken record. Donor - Made PayPal donation Sponsor / Advertiser - Site sponsor / advertiser... support these guys! Novel Approach - When a paragraph simply won't do... Make it Rain - Made Paypal donation of $100+ Bona fide - A bonafide Spec Miata driver

#8
davew

davew

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 2,297 posts
  • Location:Beloit, Wi
  • Region:Chicago
  • Car Year:1999
  • Car Number:72

Please email me the picture to the email below. I will forward to the whiteline engineer we have been dealing with for the last couple years.

 

Dave


Dave Wheeler
Advanced Autosports, the nations most complete Spec Miata shop
Author, Spec Miata Constructors Guide, version 1 and 2.0

Building Championship winning cars since 1995

4 time Central Division Spec Miata Champion car builder 2012-2013-2014-2017

Back to Back June Sprints Spec Miata 1-2 finishes 2016 and 2017

5 time June Sprints winner in Mazda's

6 Time Northern Conference Champion Car Builder

2014 SCCA Majors National point Champion car builder

2014 SCCA Runoffs winner, T4 (Bender)

2014 Central Division Champion, ITS (Wheeler)

2013 Thunderhill 25 hour winning crew chief

2007 June Sprints winner, (GT1, Mohrhauser)

Over 200 race wins and counting.
www.advanced-autosports.com
dave@advanced-autosports.com
608-313-1230

Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill We have a Winnah! - Won their 1st race... Congratulations! Sponsor / Advertiser - Site sponsor / advertiser... support these guys! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#9
Johnny D

Johnny D

    Veteran Member

  • Moderators
  • 6,121 posts
  • Location:Fremont, CA
  • Region:San Francisco
  • Car Year:1999
  • Car Number:88

From Mazdamotorsports.com

"The urethane bushings are designed to eliminate squeaks and groans and never need to be re-greased. The Delrin bushings are are a harder material and need to be re-greased regularly (zerk fittings are included). - "

 

Which one are yours and did you grease them ?

J~


2011 NASA Western Endurance Racing Championship E3 Champ
We have a Winnah! - Won their 1st race... Congratulations! Beta-Tester - Assisted us with beta testing the website. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver Novel Approach - When a paragraph simply won't do... Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill Instigator - Made a topic or post that inspired other Make it Rain - Made Paypal donation of $100+

#10
Richard Astacio

Richard Astacio

    Member

  • Members
  • PipPipPip
  • 339 posts
  • Location:Stamford CT
  • Region:NER
  • Car Year:2003
  • Car Number:80

From Mazdamotorsports.com

"The urethane bushings are designed to eliminate squeaks and groans and never need to be re-greased. The Delrin bushings are are a harder material and need to be re-greased regularly (zerk fittings are included). - "

 

Which one are yours and did you grease them ?

J~

 

using these offset bushings, and they come with their own grease and yes it was used:

 

https://www.advanced...-offset-bushing


Richard Astacio

2003 Spec Miata VVT & 2013 Cup Car
 

We have a Winnah! - Won their 1st race... Congratulations! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#11
Richard Astacio

Richard Astacio

    Member

  • Members
  • PipPipPip
  • 339 posts
  • Location:Stamford CT
  • Region:NER
  • Car Year:2003
  • Car Number:80

Please email me the picture to the email below. I will forward to the whiteline engineer we have been dealing with for the last couple years.

 

Dave

 

emailed. 


Richard Astacio

2003 Spec Miata VVT & 2013 Cup Car
 

We have a Winnah! - Won their 1st race... Congratulations! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#12
Bench Racer

Bench Racer

    Different strokes for different folks : )

  • Members
  • PipPipPipPipPip
  • 5,508 posts
  • Location:Wauwatosa, WI
  • Region:Milwaukee
  • Car Year:1990
  • Car Number:14
James, yup, I can also see what looks like a crack and a missing piece. The poster stated the bushing rubber disintegrated. Disintegrated means to me the rubber is pulverized into tiny grains. BUT, if I truly needed to make a decision I'd like to have bushing in hand the same as Dave Wheeler.  
 
Johnny, have you personally installed (heavy press fit) the WhiteLine offset bushings and do you believe there is a load that would shake, rattle and roll the bushings to rotate. The load is pretty much horizontal to the bushing centerline. Please let me know the first time a WhiteLine offset bushing rotates short of a crash situation.
 
Thanks sevenkillers, don't remember your first name.

Broken record - You are starting to sound like a broken record. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#13
B(Kuch)Kucera45

B(Kuch)Kucera45

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 568 posts
  • Location:Idependence
  • Region:NEOhio
  • Car Year:1991
  • Car Number:45
Just wondering, are those the white ones that got that dirty or do the diff bushings come in diff colors ?

Just wondering because I got a set from a friend and they where white and can't remember witch ones he gave me.
Kuch
Bona fide - A bonafide Spec Miata driver Instigator - Made a topic or post that inspired other

#14
AJ Roderick

AJ Roderick

    Member

  • Members
  • PipPipPip
  • 348 posts
  • Location:Chardon OH
  • Region:Neohio
  • Car Year:1999
  • Car Number:56

Just wondering, are those the white ones that got that dirty or do the diff bushings come in diff colors ?

Just wondering because I got a set from a friend and they where white and can't remember witch ones he gave me.

whiteline


  • B(Kuch)Kucera45 likes this
We have a Winnah! - Won their 1st race... Congratulations! Bona fide - A bonafide Spec Miata driver

#15
Johnny D

Johnny D

    Veteran Member

  • Moderators
  • 6,121 posts
  • Location:Fremont, CA
  • Region:San Francisco
  • Car Year:1999
  • Car Number:88

Johnny, have you personally installed (heavy press fit) the WhiteLine offset bushings and do you believe there is a load that would shake, rattle and roll the bushings to rotate. The load is pretty much horizontal to the bushing centerline. Please let me know the first time a WhiteLine offset bushing rotates short of a crash situation.

 

 

I haven't done these. I've only done OEM bushings with my bushing press tools with a table vise and have had no problems.

 

Jim's drill and pin sounds like the thing to do for rotating.

 

Then I just read about the grease from Mazda.

 

Will be interesting to find out how that happened, seems like a ton(s) to rip that on the inside, looks a bit cut but IDK.

J~


2011 NASA Western Endurance Racing Championship E3 Champ
We have a Winnah! - Won their 1st race... Congratulations! Beta-Tester - Assisted us with beta testing the website. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver Novel Approach - When a paragraph simply won't do... Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill Instigator - Made a topic or post that inspired other Make it Rain - Made Paypal donation of $100+

#16
Richard Astacio

Richard Astacio

    Member

  • Members
  • PipPipPip
  • 339 posts
  • Location:Stamford CT
  • Region:NER
  • Car Year:2003
  • Car Number:80

 

James, yup, I can also see what looks like a crack and a missing piece. The poster stated the bushing rubber disintegrated. Disintegrated means to me the rubber is pulverized into tiny grains. BUT, if I truly needed to make a decision I'd like to have bushing in hand the same as Dave Wheeler.  
 
Johnny, have you personally installed (heavy press fit) the WhiteLine offset bushings and do you believe there is a load that would shake, rattle and roll the bushings to rotate. The load is pretty much horizontal to the bushing centerline. Please let me know the first time a WhiteLine offset bushing rotates short of a crash situation.
 
Thanks sevenkillers, don't remember your first name.

 

 

You are correct poor choice of words, I thought about it after I posted....Didn't think you guys took things literally... :tipsy:

 

The name is Richard, I would create a signature but I wouldn't have anything else to put on there yet....


Richard Astacio

2003 Spec Miata VVT & 2013 Cup Car
 

We have a Winnah! - Won their 1st race... Congratulations! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#17
FTodaro

FTodaro

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 3,084 posts
  • Location:Columbus Ohio
  • Region:Great Lakes
  • Car Year:2001
  • Car Number:35

I haven't done these. I've only done OEM bushings with my bushing press tools with a table vise and have had no problems.

 

Jim's drill and pin sounds like the thing to do for rotating.

 

Then I just read about the grease from Mazda.

 

Will be interesting to find out how that happened, seems like a ton(s) to rip that on the inside, looks a bit cut but IDK.

J~

When i installed whiteline bushings, I also drilled a hole for a pop rivet.

 

I have not seen any degradation of the bushings in the cars i have installed them in.


Frank
TnT Racing
SCCA Ohio Valley Region
 

Make it Rain - Made Paypal donation of $100+ We have a Winnah! - Won their 1st race... Congratulations! Bona fide - A bonafide Spec Miata driver Donor - Made PayPal donation

#18
davew

davew

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 2,297 posts
  • Location:Beloit, Wi
  • Region:Chicago
  • Car Year:1999
  • Car Number:72

I just received an email from Richard with a pic of the bushing. I will forward to the Whiteline engineer. He is still sleeping in California. When I know something I will post.

 

As a followup, I have not seen this in any of the bushings we have installed.

 

The terminology is a bit confusing. There are basicly 2 manufacturers. These are the Whiteline bushings, and they are black in color. The other bransd is ISC who makes them in "white" delrin. I only sell the Whiteline and have no knowledge on the ISC. Advanced has sold several hundred sets of these bushings and this is the first issue that I am aware of.

 

Until I know more

Dave


Dave Wheeler
Advanced Autosports, the nations most complete Spec Miata shop
Author, Spec Miata Constructors Guide, version 1 and 2.0

Building Championship winning cars since 1995

4 time Central Division Spec Miata Champion car builder 2012-2013-2014-2017

Back to Back June Sprints Spec Miata 1-2 finishes 2016 and 2017

5 time June Sprints winner in Mazda's

6 Time Northern Conference Champion Car Builder

2014 SCCA Majors National point Champion car builder

2014 SCCA Runoffs winner, T4 (Bender)

2014 Central Division Champion, ITS (Wheeler)

2013 Thunderhill 25 hour winning crew chief

2007 June Sprints winner, (GT1, Mohrhauser)

Over 200 race wins and counting.
www.advanced-autosports.com
dave@advanced-autosports.com
608-313-1230

Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill We have a Winnah! - Won their 1st race... Congratulations! Sponsor / Advertiser - Site sponsor / advertiser... support these guys! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#19
Johnny D

Johnny D

    Veteran Member

  • Moderators
  • 6,121 posts
  • Location:Fremont, CA
  • Region:San Francisco
  • Car Year:1999
  • Car Number:88

, I also drilled a hole for a pop rivet.

 

IIDSYCDIYC

 

Did you want to send a letter?

Maybe along with the tranny parts if you haven't already.

 

J~


  • Gabriel Estrada likes this
2011 NASA Western Endurance Racing Championship E3 Champ
We have a Winnah! - Won their 1st race... Congratulations! Beta-Tester - Assisted us with beta testing the website. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver Novel Approach - When a paragraph simply won't do... Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill Instigator - Made a topic or post that inspired other Make it Rain - Made Paypal donation of $100+

#20
Johnny D

Johnny D

    Veteran Member

  • Moderators
  • 6,121 posts
  • Location:Fremont, CA
  • Region:San Francisco
  • Car Year:1999
  • Car Number:88

You are correct poor choice of words, I thought about it after I posted....Didn't think you guys took things literally... :tipsy:

 

The name is Richard, I would create a signature but I wouldn't have anything else to put on there yet....

 

Can we call you Dick :tipsy:

J~


2011 NASA Western Endurance Racing Championship E3 Champ
We have a Winnah! - Won their 1st race... Congratulations! Beta-Tester - Assisted us with beta testing the website. Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver Novel Approach - When a paragraph simply won't do... Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill Instigator - Made a topic or post that inspired other Make it Rain - Made Paypal donation of $100+




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users