...are posted:
February 2017 Prelims
#1
Posted 01-09-2017 02:59 PM
#2
Posted 02-17-2017 12:10 PM
7/1/2017 NEW FRONT HUBS per prelims.
Did I miss the this item or did y'all miss this items?
#3
Posted 02-17-2017 12:18 PM
7/1/2017 NEW FRONT HUBS per prelims.
Did I miss the this item or did y'all miss this items?
Didn't Todd refer to this in the March Prelim as Cart before the horse.
#4
Posted 02-17-2017 07:19 PM
Didn't Todd refer to this in the March Prelim as Cart before the horse.
Buy EM BOOKS AND BUY EM MORE BOOKS AND SOME STILL HAVE TROUBLE READING.
EFFECTIVE 6/1/2016 Mazda Part Number 0000045 HUB -ST < Dude, me think that be the cart right behind the horse.
#5
Posted 02-18-2017 12:14 AM
#6
Posted 02-18-2017 11:16 AM
There's a reason prelims are prelims. Wait for it.....
Full disclosure: SMAC chairman, my opinions do not reflect anything to do with the SMAC unless specifically stated.
Todd Lamb
Atlanta Speedwerks
www.atlspeedwerks.com
SpeedShift Transmissions - reliability and performance
Spec Miata / Spec Boxster / Spec Cayman specialist
Spec MX-5 Challenge Series Director
Global MX-5 Cup team
#7
Posted 02-18-2017 04:37 PM
7/1/2017 NEW FRONT HUBS per prelims.
Did I miss the this item or did y'all miss this items?
My guess: Tappered bearing hub @ $350 each
#8
Posted 02-18-2017 09:57 PM
My guess: Tappered bearing hub @ $350 each
Mazda's site says it's more than $350 but less than $400.
While we're talking upgrades, what about the subframe reinforcement mentioned at:
#9
Posted 02-18-2017 10:12 PM
#10
Posted 02-19-2017 01:25 PM
www.miatacage.com
360-606-7734
#11
Posted 02-22-2017 10:29 AM
Judging from what I read in the prelims, it would appear this is a codification of using the Mazda Motorsports (MM) "enduro hub" they sell. The part number they show is the "SCCA bastardization" of the MM part number.
Reading the product write-up they released a couple of years ago about it (early 2015), MM send out factory hubs to a local vendor (Pro Parts - I asked in 2015) for a complete refit of new balls (more sphericity/better roundness tolerances) and different grease.
Prior to this, it has always been a question of whether the hub was "compliant" while not having a mechanism to actually "tech shed" approve it.
Happy to be corrected by those on the SMAC!
#12
Posted 02-22-2017 12:42 PM
#13
Posted 03-21-2017 04:22 PM
Mazdamotorsports.com email I received today has:
Coming soon:
Miata tapered roller bearing hubs.
Does this lift the gag order?
#14
Posted 03-21-2017 04:33 PM
Mazdamotorsports.com email I received today has:
Coming soon:
Miata tapered roller bearing hubs.
Does this lift the gag order?
No gag, just on back order.
I assume there's a make try, test, everything cool ? ok, sell, process.
All ready to fork out $758.00 for the set ??
J~
#15
Posted 03-21-2017 05:36 PM
#16
Posted 03-21-2017 05:57 PM
I'm going to throw out an example. A front hub with bearings for a mid 90s Camaro will set you back $39.95. What on God's green earth makes a Miata roller bearing worth $350?
Just throwing out an example- you can also get a front hub for a Miata from Rockauto for $21.89.
I would never run it. Sometimes you get what you pay for.
#17
Posted 03-21-2017 06:33 PM
#18
Posted 03-21-2017 06:35 PM
I'm going to throw out an example. A front hub with bearings for a mid 90s Camaro will set you back $39.95. What on God's green earth makes a Miata roller bearing worth $350?
No attempt to justify two Miata aftermarket front hubs at $758.00. But, they do each have two real tapered roller bearings with separate hardened inner and outer races. When we know the bearing numbers, we'll be able to check the radial and axial loads, which we can't do for the OEM hubs.
#19
Posted 03-21-2017 06:46 PM
#20
Posted 03-21-2017 07:03 PM
I think i went through one hub in two years. I went out and got about 8 old Oem hubs prepacked them all then i would swap out about every two weekends. Cut way down on failures.
750 for two sounds steep. would there not be less friction in the Stock hub?
Frank
TnT Racing
SCCA Ohio Valley Region
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users