Sign In
Create Account
I want to add a cross brace to my rear down tube in the cage I'm welding up but in order to add the tube at the landing plate I would have to notch very close to the fuel tank so I'm hesitant. Would it be effective to add a cross brace from one corner and weld it directing to one down tube a few inches above the rear landing plate?
Last roll cage question
Started by
wera44
, 04-25-2017 02:32 PM
#1
Posted 04-25-2017 02:32 PM
wera44
-
- Members
-
- 17 posts
Member
- Location:Georgia
- Car Year:2003
- Car Number:44
Back to top
Report
#2
Posted 04-25-2017 07:03 PM
wera44
-
- Members
-
- 17 posts
Member
- Location:Georgia
- Car Year:2003
- Car Number:44
#3
Posted 04-26-2017 02:35 PM
luvin_the_rings
-
- Members
-
- 204 posts
Member
- Location:Los Angeles, CA
- Car Year:1990
Its better than nothing. You can also weld in a gusset to support the bending created on that joint or put a backing tube on it to connect it to the trunk floor.
- wera44 likes this
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
