Jump to content

Photo

Mazda Competition engine mounts v. standard

- - - - -

Best Answer Jeff Wasilko , 08-30-2018 10:28 AM

In my experience the comp mounts have a bit of white paint on a raised bump on each side.

Go to the full post »


  • Please log in to reply
13 replies to this topic

#1
Ryan Roberson

Ryan Roberson

    Member

  • Members
  • PipPipPip
  • 12 posts
  • Location:Indianapolis
  • Region:Great Lakes (NASA)
  • Car Year:1999
  • Car Number:44

Any easy way to tell the difference?  I ordered the comp mounts, and they were packed in paper, not in the typical bag with the Mazda part number on it.  Anyhow, I replaced them before Mid-O, and I'd say I'm not certain I actually have the comp mounts given the experience.  Any part number or marking difference?  The only thing I noted was a concerted effort on the part of someone to mark the sides of the mounts with a white marker.  I'm hoping that means "comp mount"!



#2
davew

davew

    Veteran Member

  • SMembers
  • PipPipPipPipPip
  • 2,297 posts
  • Location:Beloit, Wi
  • Region:Chicago
  • Car Year:1999
  • Car Number:72

IMHO, the comp mounts are better than the stock ones as far as strength. But that is the only difference. You will not notice anything in how the car drives. If you want something stiff, go to a poly mount like the ones I had made for STL/Prod cars. They are not legal for SM.


  • Ryan Roberson likes this

Dave Wheeler
Advanced Autosports, the nations most complete Spec Miata shop
Author, Spec Miata Constructors Guide, version 1 and 2.0

Building Championship winning cars since 1995

4 time Central Division Spec Miata Champion car builder 2012-2013-2014-2017

Back to Back June Sprints Spec Miata 1-2 finishes 2016 and 2017

5 time June Sprints winner in Mazda's

6 Time Northern Conference Champion Car Builder

2014 SCCA Majors National point Champion car builder

2014 SCCA Runoffs winner, T4 (Bender)

2014 Central Division Champion, ITS (Wheeler)

2013 Thunderhill 25 hour winning crew chief

2007 June Sprints winner, (GT1, Mohrhauser)

Over 200 race wins and counting.
www.advanced-autosports.com
dave@advanced-autosports.com
608-313-1230

Survive the 25, NASA Thunderhill - Survive the 25, NASA Thunderhill We have a Winnah! - Won their 1st race... Congratulations! Sponsor / Advertiser - Site sponsor / advertiser... support these guys! Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#3
Jeff Wasilko

Jeff Wasilko

    Member

  • Members
  • PipPipPip
  • 272 posts
  • Location:Boston, MA
  • Region:NER
  • Car Year:1995
  • Car Number:08
✓  Best Answer

In my experience the comp mounts have a bit of white paint on a raised bump on each side.


  • William Keeling and Ryan Roberson like this

#4
BNaumann

BNaumann

    Member

  • Members
  • PipPipPip
  • 227 posts
  • Region:DET
  • Car Year:2000
  • Car Number:67
Biggest difference I noticed is the amount the shifter moves on camera when scrubbing tires.
  • Steve Scheifler likes this

#5
Ryan Roberson

Ryan Roberson

    Member

  • Members
  • PipPipPip
  • 12 posts
  • Location:Indianapolis
  • Region:Great Lakes (NASA)
  • Car Year:1999
  • Car Number:44

Funny, Brian, that was a test I was doing to see if the new mounts are better/stiffer than the ones I replaced.  I was watching my videos before/after the swap.  I was hoping the mount swap would help with the 2nd to 3rd gear shift (in the corners).  It didn't help much, if at all, but practice will probably solve the problem.

 

Jeff, thanks for nailing the confirmation.



#6
Rick Worth

Rick Worth

    Member

  • Members
  • PipPipPip
  • 36 posts
  • Location:Tennessee
  • Region:Mid-South
  • Car Year:1999
  • Car Number:24

Funny, Brian, that was a test I was doing to see if the new mounts are better/stiffer than the ones I replaced.  I was watching my videos before/after the swap.  I was hoping the mount swap would help with the 2nd to 3rd gear shift (in the corners).  It didn't help much, if at all, but practice will probably solve the problem.

 

Jeff, thanks for nailing the confirmation.

So I'm not the only one that has that issue? LOL. I've found that you don't grab the shifter for the 2-3 shift but just push it forward with your open palm helps. Let the springs do it. 


  • Ryan Roberson and Steve Scheifler like this

#7
Dave D.

Dave D.

    Member

  • Members
  • PipPipPip
  • 199 posts
  • Location:New Jersey
  • Region:NASA Northeast
  • Car Year:2002
  • Car Number:14

To me, I can tell immediately when I start the engine. As the engine lights up and gives that shake, the stock mounts let the engine wiggle much more then the comp mounts. Then as I let the clutch out the Comps feel more direct and reactive,especially when using the more aggressive puck style clutch disc(even with the sprung center). Side by side comparison will show the difference.


  • Alberto likes this

#8
ECOBRAP

ECOBRAP

    Member

  • Members
  • PipPipPip
  • 405 posts
  • Location:Bay Area, CA
  • Region:Nor Cal
  • Car Year:1999
  • Car Number:59

Anyone have the part number for the Mazda Comp motor mounts?


-Ecobrap

We have a Winnah! - Won their 1st race... Congratulations! Bona fide - A bonafide Spec Miata driver

#9
Steve Scheifler

Steve Scheifler

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 2,816 posts
They should be in the GCR under allowed modifications.
Instigator - Made a topic or post that inspired other Broken record - You are starting to sound like a broken record.

#10
Steve Scheifler

Steve Scheifler

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 2,816 posts
9.1.7.3.m. The Mazdaspeed motor mount, part NAY1-39-040 is allowed.
  • ECOBRAP likes this
Instigator - Made a topic or post that inspired other Broken record - You are starting to sound like a broken record.

#11
OrangeCrush86

OrangeCrush86

    Member

  • Members
  • PipPipPip
  • 424 posts
  • Location:BECKER
  • Region:Minnesota

I just ordered and received two of them. When I pulled my current engine I found that both stock mounts had been been broken. Rubber separated from the metal on both sides. Good thing these things don't have any torque, who knows how long I was racing with them like that lol.


____________________________

http://jenkinsracing.com


#12
tburas56

tburas56

    Member

  • Members
  • PipPipPip
  • 166 posts
  • Location:FL
  • Region:South East
  • Car Year:1990
  • Car Number:56

What is the best way to change the mounts out? Is there a easy way?

 

Besides getting some else to do it....


Donor - Made PayPal donation SCCA National Champion - Won SCCA Runoffs at Road America Majors Winner - BFG Supertour Winner - World Challenge Winner - World Challenge Winner June Sprints winner  - June Sprints winner Grand-Am Winner in a Mazda - Grand-Am Winner in a Mazda MX5 Cup Winner - Has won a Race in the MX5Cup.com Series We have a Winnah! - Won their 1st race... Congratulations! Series Champ - Won a points based series in a Spec Miata Bona fide - A bonafide Spec Miata driver

#13
ECOBRAP

ECOBRAP

    Member

  • Members
  • PipPipPip
  • 405 posts
  • Location:Bay Area, CA
  • Region:Nor Cal
  • Car Year:1999
  • Car Number:59

I just ordered and received two of them. When I pulled my current engine I found that both stock mounts had been been broken. Rubber separated from the metal on both sides. Good thing these things don't have any torque, who knows how long I was racing with them like that lol.

 

Yep first race in the new car and the motor moved back and forth a solid 2-3 inches. No wonder I was missing 2-3 gear shifts mid corner, whole thing was probably flexed off to the side.


-Ecobrap

We have a Winnah! - Won their 1st race... Congratulations! Bona fide - A bonafide Spec Miata driver

#14
EricJ

EricJ

    Member

  • Members
  • PipPipPip
  • 44 posts
  • Location:Flower Mound, TX
  • Region:Texas
  • Car Year:1999

The driver's side is harder to take out than the passenger's side, so take the passenger's side out, then the driver's side. Then replace the driver's side followed by the passenger's side.

Use a jack with a block of wood under the oil pan. Be careful to not break the coils when you raise the engine.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users