Jump to content

Photo

Solo DL + GP HD rev2.2

- - - - -

  • Please log in to reply
2 replies to this topic

#1
-P-

-P-

    Member

  • Members
  • PipPipPip
  • 58 posts
  • Location:Dallas
  • Region:Southwest
  • Car Year:1999
  • Car Number:31

I'm looking to purchase a Smartycam to replace my GoPro for the simple fact it will turn on/off easier and export is quicker. Obviously the overlay and lap comparisons are important if I'm going to spend the money, but have a question regarding compatibility.

 

I have a Solo DL (not v2) which can only be configured in RaceStudio 2, but the camera requires 3. Is this going to cause issues with lap time and ECU data coming into the DL and then fed to the Smartycam? I figure they will work fine and you will just configure with each required version but wanted to check before. I did a bit of searching but didnt find anything concrete.


________________

Shaffer

SM #31 - Texas

 


#2
EricJ

EricJ

    Member

  • Members
  • PipPipPip
  • 27 posts
  • Location:Flower Mound, TX
  • Region:Texas
  • Car Year:1999

You may want check over here, the AIM experts answer a lot of questions there.

https://www.facebook...40815893249677/


  • -P- likes this

#3
Jeff Wasilko

Jeff Wasilko

    Member

  • Members
  • PipPipPip
  • 238 posts
  • Location:Boston, MA
  • Region:NER
  • Car Year:1995
  • Car Number:08

I'm looking to purchase a Smartycam to replace my GoPro for the simple fact it will turn on/off easier and export is quicker. Obviously the overlay and lap comparisons are important if I'm going to spend the money, but have a question regarding compatibility.

 

I have a Solo DL (not v2) which can only be configured in RaceStudio 2, but the camera requires 3. Is this going to cause issues with lap time and ECU data coming into the DL and then fed to the Smartycam? I figure they will work fine and you will just configure with each required version but wanted to check before. I did a bit of searching but didnt find anything concrete.

 

RS2 and RS3 are just for configuration. You'll have no issues with the setup, other than RS2 being a bit dated.

 

You'll use RS2A (Analysis) to do data review of data on the Solo DL.


  • -P- likes this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users