Jump to content

Photo

Should the Master Switch kill the engine?

- - - - -

  • Please log in to reply
3 replies to this topic

#1
manthony121

manthony121

    Member

  • Members
  • PipPipPip
  • 144 posts
  • Location:upstate new york
  • Region:Glen Region
  • Car Year:1991
  • Car Number:59

I'm having a discussion about wiring the Master Switch in a Miata.  The NASA CCR specifies that "The switch should shut off the motor and cut all power except to the on-board fire system, radio communication,and any other life support / medical device."  The SCCA GCR does not have the requirement that the master switch shut off the motor: "The master switch shall be installed directly in either battery cable and shall cut all electrical circuits but not an on-board fire system."

 

It seems to me that the master switch *should* turn off the engine.  Is this an oversight in the GCR?


Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#2
chris haldeman

chris haldeman

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 928 posts
  • Location:Mckinney
  • Region:texas
  • Car Year:1999
  • Car Number:73
The switch must stop the engine. Remember all electrical circuits includes but is not limited to ignition,alternator,coil packs ,relays ect.
X-factorracing.com
3 podium finishes
2 2013 NASA nats
1 2013 Scca runoffs
Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver BFG Supertour Winner - Circuit of the Americas Winner - Majors Winner - Make it Rain - Made Paypal donation of $100+ We have a Winnah! - Won their 1st race... Congratulations!

#3
manthony121

manthony121

    Member

  • Members
  • PipPipPip
  • 144 posts
  • Location:upstate new york
  • Region:Glen Region
  • Car Year:1991
  • Car Number:59

I've noticed that the very popular "Dave Wheeler Single Pole Kill Switch" method does not meet the requirements for either the SCCA or NASA.  It wires the positive terminal of the battery directly to the "B" terminal of the alternator, bypassing the kill switch.


Donor - Made PayPal donation Bona fide - A bonafide Spec Miata driver

#4
Dave D.

Dave D.

    Member

  • Members
  • PipPipPip
  • 199 posts
  • Location:New Jersey
  • Region:NASA Northeast
  • Car Year:2002
  • Car Number:14

It wires the "B" terminal t the "+" side of the battery so that when you kill everything and the engine is spinning down, the magnetic field in the alternator collapses which causes a voltage spike, that is easily and conveniently absorbed by the battery. I usually will connect that wire with a fusible link at the end,so if things get really bad, the link will cut the feed( it would have to get really bad to crush the front end so  that the alt wire could be shorted). Dave's diagram is (arguably) the most simple and effective way of wiring up a kill switch in a Miata.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users