Traqmates New Track Dash
#1
Posted 06-13-2011 08:42 AM
Great Job Guys
- bvondran likes this
#2
Posted 06-13-2011 12:27 PM
#3
Posted 06-14-2011 11:07 AM
-Cy
Supported by LTD Racing
2011 + 2013 NER STU Champion
#4
Posted 06-14-2011 11:52 AM
If you press where it says "Traqmate" above the display, that will toggle the backlight on and off.I know the old display can be backlit because that's what it does when I connect it to my laptop but I couldn't figure out how to make it do that while inside the car.
Steve DeVinney
Retired mediocre driver
#5
Posted 06-14-2011 07:59 PM
#6
Posted 06-14-2011 08:27 PM
Frank
TnT Racing
SCCA Ohio Valley Region
#7
Posted 06-15-2011 12:52 AM
-Cy
Supported by LTD Racing
2011 + 2013 NER STU Champion
#8
Posted 06-15-2011 10:13 AM
- the 2GB memory card that it comes with has a firmware update on it for the main unit. So if you've got an older unit, don't format the new card until you connect the Traqdash to your main unit.
- all data is stored on the memory card, so the display unit can be permanently mounted in the vehicle.
-Cy
Supported by LTD Racing
2011 + 2013 NER STU Champion
#9
Posted 06-15-2011 12:13 PM
East Street Auto Parts
Jim@Eaststreet.com
800 700 9080
#10
Posted 06-15-2011 12:29 PM
can you use the new display with the old unit or do you have to upgrade the entire system??
No need to replace your entire system.
You'll just need to update the cables to the new locking connector style if you have a unit with the old style plugs.
And install the new firmware that CY mentioned.
Then it will all work.
------------
SCHAUT SPEED Motorsports
Race Technology - Traqmate
Cobalt Friction - Amsoil
info@schautspeed.com
248.939.6108
------------
WHRRI / GLDiv
'92 SM - #66
#11
Posted 10-29-2011 09:42 PM
#12
Posted 12-08-2011 09:38 AM
They are indeed coming out with a module for the go Pro in January 2012. If you get that you can also link up your air fuel meter to it and get that data too. I have innovate, was told its the Brown wire
Frank
TnT Racing
SCCA Ohio Valley Region
#13
Posted 12-08-2011 10:10 AM
The green wire with yellow stripe on the center plug behind cluster is what we tap into.
Jim
East Street Auto Parts
Jim@Eaststreet.com
800 700 9080
#14
Posted 12-08-2011 10:31 AM
Does anyone know how to set the shift lights?
Yes Glen Stephens He did mine
East Street Auto Parts
Jim@Eaststreet.com
800 700 9080
#15
Posted 12-08-2011 03:55 PM
(null)
SM #3
#16
Posted 12-25-2011 04:36 PM
I pulled out the gauge panel and it has three plugs one over the tach, one over the center and one over the odometer, Labeled in that order
File #002 is the gauge cluster
File #003 is the clip above the tach
File #001 is the center clip
File #004 is the one over the spedo
The only Green with Yellow wire I could find was one the right hand clip with the black connector over the Tach. not the center plug, Jim mentioned. The Flyin Miata write up has me looking for a green wire with an orange stripe, and I could not find any wire with an orange stripe?
Frank
TnT Racing
SCCA Ohio Valley Region
#17
Posted 12-25-2011 04:40 PM
#18
Posted 12-25-2011 06:20 PM
#19
Posted 12-26-2011 03:42 PM
Now i just have to wait for them to ship me the module for the go pro.
Frank
TnT Racing
SCCA Ohio Valley Region
#20
Posted 12-26-2011 06:36 PM
Jim
- TEAM MEDICARE likes this
East Street Auto Parts
Jim@Eaststreet.com
800 700 9080
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users