ABS removal
#1
Posted 12-31-2010 10:55 AM
Thanks
#2
Posted 01-01-2011 03:35 PM
I am in the process of removing the ABS system from my '92 SSM. I have all the hard lines, proportioning valve and master cylinder from a '90. Do I also need the booster from the '90?
Thanks
No one?
#3
Posted 01-02-2011 04:02 AM
not sure if this relates, But I just had to remove the abs in a '99. I changed everything. master, booster and the lines. I believe you could keep the booster but it was a different part number and I decieded to change it.No one?
Kevin@techsportracing.com
www.techsportracing.com
#4
Posted 04-05-2011 09:40 AM
#5
Posted 04-05-2011 09:51 AM
my ABS system is still in the car, but the builder appears to have disabled it somehow. i have an ABS light on my dash that is always on.
is it legal (scca SM rules) to remove the entire system in favor of a non ABS system from a different car?
1999 SM #92 SoPac division
#6
Posted 04-05-2011 10:59 AM
On a 99 the non abs master will not bolt to a abs booster.
Every time I have converted a early car I have changed the booster also, so I can not say what will fit
Dave
Dave Wheeler
Advanced Autosports, the nations most complete Spec Miata shop
Author, Spec Miata Constructors Guide, version 1 and 2.0
Building Championship winning cars since 1995
4 time Central Division Spec Miata Champion car builder 2012-2013-2014-2017
Back to Back June Sprints Spec Miata 1-2 finishes 2016 and 2017
5 time June Sprints winner in Mazda's
6 Time Northern Conference Champion Car Builder
2014 SCCA Majors National point Champion car builder
2014 SCCA Runoffs winner, T4 (Bender)
2014 Central Division Champion, ITS (Wheeler)
2013 Thunderhill 25 hour winning crew chief
2007 June Sprints winner, (GT1, Mohrhauser)
Over 200 race wins and counting.
www.advanced-autosports.com
dave@advanced-autosports.com
608-313-1230
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users