I'm trying to figure out just what needs to be connected at the cutoff switch. I know the pos. cable from batt. and the other goes to the startrer. But what about the Alt. wire ? And do I need to rewire the fusebox. I'm having trouble finding the correct answers so I thought You guys may be able to help me out
Thanx for any input.
How to wire the cutoff switch on a 99.
Started by
Duane Polsley
, 01-16-2011 06:43 PM
#1
Posted 01-16-2011 06:43 PM
#2
Posted 01-16-2011 07:58 PM
I ran it this way:
1. Stock battery positive connection off of battery to one side of switch.
2. New battery positive connection to other side of switch directly to battery
2. Removed white wire off of alternator and run to the starter where battery connects.
3. Run wire from where white wire was on alternator to the battery side of switch
Now switch will control BOTH battery supplied power and alternator supplied power.
Hope this helps, good luck.
1. Stock battery positive connection off of battery to one side of switch.
2. New battery positive connection to other side of switch directly to battery
2. Removed white wire off of alternator and run to the starter where battery connects.
3. Run wire from where white wire was on alternator to the battery side of switch
Now switch will control BOTH battery supplied power and alternator supplied power.
Hope this helps, good luck.
#3
Posted 01-17-2011 07:07 AM
There are several ways to do it and my way is not for SCCA/NASA (but it works good enough for FIA).
I have the switch in the center console (pull wire to the driver A-pillar), just to explain some reasons for doing it differently.
My switch breaks the ground to the battery and the 12V coming from the ignition switch. Since the Alt is regulated by the ECU, it stops giving power as soon as the ECU looses power. I have tested it both in controlled tests and by accident at full throttle (I hit the switch by accident while shifting), and it works as it should (it sure dies).
Whatever you do, don't copy this (or anything else really) until you checked with some technicians. The techs are the ones who issue log books and let you start, regardless what solutions someone else have managed to run for a number of years somewhere else.
I have the switch in the center console (pull wire to the driver A-pillar), just to explain some reasons for doing it differently.
My switch breaks the ground to the battery and the 12V coming from the ignition switch. Since the Alt is regulated by the ECU, it stops giving power as soon as the ECU looses power. I have tested it both in controlled tests and by accident at full throttle (I hit the switch by accident while shifting), and it works as it should (it sure dies).
Whatever you do, don't copy this (or anything else really) until you checked with some technicians. The techs are the ones who issue log books and let you start, regardless what solutions someone else have managed to run for a number of years somewhere else.
#4
Posted 06-02-2011 10:49 PM
I ran it this way:
1. Stock battery positive connection off of battery to one side of switch.
2. New battery positive connection to other side of battery switch directly to battery
2. Removed white wire off of alternator and run to the starter where battery connects.
3. Run wire from where white wire was on alternator to the battery side of switch
Now switch will control BOTH battery supplied power and alternator supplied power.
Hope this helps, good luck.
+1. I am sure this will help. This is also how I do it. Just be careful with connecting it with the battery switch.
#5
Posted 06-03-2011 09:42 AM
Advanced Autosports sells a great kit for this. Dave W is on this site often or you could search for his website. I went the easy route and bought his kit. Well thought out and great instructions.
#6
Posted 06-03-2011 11:18 AM
I did it the same way as Gunpilot except I am running a remote solenoid system and I have 2 toggle switches with red covers in the car that can trip the solenoid cut off. I have one in the center console and the other one is over near the pass window.
-- Jay --
96 Spec Miata - Build in progress
North East SCCA
96 Spec Miata - Build in progress
North East SCCA
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users