1 reply to this topic

[BlueJay73]

Question: 1--Does the pilot bearing fit into the flywheel or into the back of the crank?

 

                 2--Anybody know the size of the bolts that attach the pressure plate to the flywheel?

 

I don't have the old engine and trans out and apart yet, so I can't copy that.

 

Thanks,

Jim

 

Edit:  "The pilot bearing is mounted inside the flywheel," per Chilton book.

Now, for the bolts.

Edited by BlueJay73, 08-31-2015 08:42 PM.

[BlueJay73]

To answer my own question, after some digging, found out that bolts are M8x1.00x18mm.

 

Maybe someone else can use this info in the future.