Jump to content

Photo

AIM EVO4 - Blue 5-50v or White 150-400v for RPM?

- - - - -

  • Please log in to reply
2 replies to this topic

#1
Alberto

Alberto

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 1,471 posts
  • Location:Mountain View, CA
  • Region:SFR
  • Car Year:1990

I'm wiring in a new to me EVO4.  Trying to determine which wire to use for RPM?  I already found the tach signal wire in the Miata harness.  But which wire do I use from the AIM pigtail?  The Blue says 5-50v and the White says 150-400v.  Both seem to work. Which is the correct one though?

 

Interesting to note that they both seem to display the same incorrect RPM at idle (~2500ish) but I'm thinking that might be a config that I need to fix.

 

Thanks.


Bona fide - A bonafide Spec Miata driver

#2
TrailBrake

TrailBrake

    Member

  • Members
  • PipPipPip
  • 79 posts
  • Location:Manchester, NH

Use the blue wire. You need to check the divider in the RPM setup. It should be /2 IIRC.


Matt Romanowski

www.TrailBrake.net


#3
Alberto

Alberto

    Veteran Member

  • Members
  • PipPipPipPipPip
  • 1,471 posts
  • Location:Mountain View, CA
  • Region:SFR
  • Car Year:1990

Thanks!


Bona fide - A bonafide Spec Miata driver




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users