3 replies to this topic

[WarmShoe]

Is seems reasonable to monitor air/fuel ratio by tapping into O2 sensor and displaying on Traqmate or saving data during dyno runs for stetting fuel pressure regulator. Even have a digital out if it strays into lean on the track.

No fancy gauge required.

Any thoughts?

[FTodaro]

I just spent 175.00 to buy the innovate set up and it works sweet with a nice Gauge, You can also wire it to your data logger or a lap top. I did this because if you run SCCA and NASA they run different plates for the 1999 and I thought I would need to make adjustments between the two set ups. But as it turns out the computer makes adjustments and I will not need to make a fuel pressure change between the two set ups. It is still nice, however, to be able to keep an eye on it as it may change slightly with a change in temp and humidity.

[James York]

The OEM is narrow band and not suitable tuning. You need to get one of the aftermarket setups.

[Lee Tilton]

+1 on the Innovate setup. I feed mine into the traqmate.