Big thanks to Robbie, York and Chuck for the help in tech shed taking apart Justin's car. We did it in record time and were cleared Saturday night.
The engine was a second season Ti speed bottom end with a new East Street head.
We made the car very visible in tech so any passers by could see everything we were doing.
so this is what was teched on Justin's car.
driver weight, car weight
fuel test.
Crank, Pistons, Rods, Rings, Bearings. Weight and any signs of modification.
Flywheel Weight
Pressure plate
Head Completely dissembled. All valves out except cylinder number 1.
CC head.
Bore, stroke, deck height measured
Head gasket measured.
Cam doctor cams.
cam gears inspected
block inspected
intake manifold, exhaust manifold, downpipes inspected.
restrictor plate measured
TB inspected
Trans inspected
3rd gear inspected compared to stock new, stock used, 2 coatings and REM
5th gear spacer
drive shaft inspected
rear diff inspected, gear ratio, coatings, rem
one rear shock and one front shock dynoed
both front wheel bearings for coatings, Ceramic
upper and lower a arms front and rear
subframe bracing
sway bar size
under side of car for extra panels
stall test
Restrictor gaskets
their may have been more that i can't remember. The Saturday night drunkfest wiped out a few brain cells.