Spec Miata Garage
Tech Tips and Car Construction information and discussion.
Sponsored & Moderated by East Street Automotive
Sponsored & Moderated by East Street Automotive
Tall Driver, Back AgainStarted by HLF , 04-25-2016 |
|
|
||
Kirkey 71 Series Seat MountingStarted by Andrew Stowell , 03-10-2016 aluminum, seat, mounting, kirkey and 1 more... |
|
|
||
99 Alternator regulation issuesStarted by BNaumann , 04-15-2016 |
|
|
||
Stock street tires as rains?Started by BlueJay73 , 04-16-2016 |
|
|
||
Wiring helmet for radio setup - which side?Started by Sphinx , 04-14-2016 |
|
|
||
Correct offset bushing orientationStarted by Chris Ashcraft , 03-31-2016 |
|
|
||
Miata Intake Port 1994 and 1999 along with 1999 VLIMStarted by Bench Racer , 03-27-2016 1.8 L, Improvements |
|
|
||
Bumpstop/tophat questionStarted by Brandon , 03-28-2016 |
|
|
||
Brake Pressure SensorStarted by Jamz14 , 03-25-2016 |
|
|
||
What battery for 99?Started by BNaumann , 03-21-2016 |
|
|
||
Aftermath of Spun Bearing. Worth a Rebuild?Started by DamonB06 , 05-18-2011 |
|
|
||
OEM Springs & SM Shocks?Started by swegian , 03-15-2016 |
|
|
||
Lost Compression On #4 CylinderStarted by Carl , 03-13-2016 |
|
|
||
Traqdash and AEM GaugesStarted by BKJ , 03-13-2016 |
|
|
||
Tested at VIRStarted by Lmcgrew79 , 03-13-2016 |
|
|
||
Fat Cat "sleeve nut" came off shock assemblyStarted by BlueJay73 , 03-08-2016 |
|
|
||
Looking for 1 Hoosier 205/50/15 at VirStarted by Lmcgrew79 , 03-04-2016 |
|
|
||
Ball Joint & Tie rod end boot replacementStarted by Rick Worth , 03-04-2016 |
|
|
||
99 Springfield Dyno Upper Radiator HoseStarted by BNaumann , 02-29-2016 |
|
|
||
Brake padsStarted by Tom M , 01-15-2014 Hot |
|
|
||
Swaybar strictionStarted by ChrisA , 02-26-2016 |
|
|
||
Does this seat/harness setup look legal?Started by UFfitz56 , 02-15-2016 |
|
|
||
Total cage weightStarted by endura , 02-22-2016 |
|
|
||
Fuel lines not flush with underbody - worry about it?Started by Sphinx , 02-16-2016 |
|
|
||
Front toe keeps changingStarted by Tao , 02-11-2016 |
|
|
||
94 SM First Timer BuildStarted by Lmcgrew79 , 12-29-2015 Hot |
|
|
||
Front Hub FailureStarted by Todd Green , 03-25-2014 Hot |
|
|
||
Which generation suspension top is this?Started by Chris Ashcraft , 02-04-2016 |
|
|
||
Restrictor measurementsStarted by ner88 , 01-28-2016 |
|
|
||
Oil pan sealerStarted by Steve Scheifler , 01-26-2016 |
|
|